Antminer D3 Dash Miner 15GHs X11 include APW3 ++

1,850.00 

Availablity:  in stock

Bitmain Antminer D3 15GH / s
Specifications:

1. Hash rate: 15 GH/s (Variation of ±5% is expected)
2. Hashing algorithm: X11
3. Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).
4. Power Efficiency: 1.6 J/MH + 10% (at the wall, with APW3 93% efficiency, 25°C ambient temp)
5. Rated Voltage: 11.60 ~13.00V
6. Dimensions of the miner: 320*130*190mm
7. Operating Temperature: 0 °C to 40 °C
8. Network Connection: Ethernet

Uwagi:

Energy consumption data differ depending on the power supply performance, ambient temperature and power meter accuracy.

 

We recommend the APW3 ++ power supply for use with the Antminer D3 15GH / s. One power supply supports one Antminer D3 15GH / s.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.

This is the most powerful and most valuable mining equipment in the world. Here you can check your profit.

https://www.cryptocompare.com/mining/calculator/dash?HashingPower=15&HashingUnit=GH%2Fs&PowerConsumption=1200&CostPerkWh=0.15

Antminer D3 Dash Miner 15GHs X11 include APW3 ++

1,850.00 

Availablity:  in stock

Bitmain Antminer D3 15GH / s
Specifications:

1. Hash rate: 15 GH/s (Variation of ±5% is expected)
2. Hashing algorithm: X11
3. Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).
4. Power Efficiency: 1.6 J/MH + 10% (at the wall, with APW3 93% efficiency, 25°C ambient temp)
5. Rated Voltage: 11.60 ~13.00V
6. Dimensions of the miner: 320*130*190mm
7. Operating Temperature: 0 °C to 40 °C
8. Network Connection: Ethernet

Uwagi:

Energy consumption data differ depending on the power supply performance, ambient temperature and power meter accuracy.

 

We recommend the APW3 ++ power supply for use with the Antminer D3 15GH / s. One power supply supports one Antminer D3 15GH / s.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.

This is the most powerful and most valuable mining equipment in the world. Here you can check your profit.

https://www.cryptocompare.com/mining/calculator/dash?HashingPower=15&HashingUnit=GH%2Fs&PowerConsumption=1200&CostPerkWh=0.15