APW3++ for L3+

160.00 

Availablity:  in stock

The power cord is not included, please find one with at least 10A from your local market.
The APW3++ can only power one Antminer L3+ miner if it is connected to a 110V mains power supply. To power two Antminer L3+ miners with the APW3++, it must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your country.

Specifications

Output

DC Voltage

12.15V

Rated Current
(220V input)

133A

Rated Current
(110V input)

100A

Rated Power
(220V input)

1600W

Rated Power
(110V input)

1200W

Ripple & Noise

<1%

Voltage Regulation

<2%

Source Regulation

<1%

Load Regulation

<1%

Setup, Rise Time

<2S Power off Protection Trip Time >9mS

Interface Type

9 pairs of 6 pin PCI-E connectors.

Input

Voltage Range

100-240V AC

Starting Voltage

95-105V AC

Frequency Range

47-63Hz

Power Factor

>0.95 (full load)

Leakage Current

<1.5mA (220V 50Hz)

Protection

Low-voltage Input

80-89V AC

Output Short Circuit

Yes

Output Overcurrent

134-185A max.

Overheat Protection

Yes

Environment Conditions

Operating Temperature

-20°C – 50°C

Operating Humidity

20% – 90% relative humidity (non-condensing)

Structure

Dimensions

220mm*108mm*62mm

Cooling

Fan

Forced-air cooling