Bitmain Antminer L3+ 504MHs include APW3+


Availablity:  in stock

Bitmain Antminer L3+ 504MH/s


1. Hash Rate: 504 MH/s ±5%
2. Power Consumption: 800W + 10% (at the wall, with APW3 ,93% efficiency, 25C ambient temp)
3. Power Efficiency: 1.6 J/MH + 10%(at the wall, with APW3 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip type: BM1485 (288 chips on four hashing boards, 72 chips on one hashing board)
6. Dimensions: 352mm(L)*130mm(W)*187.5mm(H)
7. Operating Temperature: 0 °C to 40 °C
8. Network Connection: Ethernet


Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

APW3 + power supply included.

We recommend the APW3+12-1600-B2 power supply for use with the Antminer L3+. One power supply supports one Antminer L3+ 504 mh/s.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.